ODI kissface Extraordinary 8 in One Skin Care Specialist

ODI kissface Extraordinary 8 in One Skin Care Specialist

Treatment Scopes

Skin Cleaning: Pores, face, back and chest cleaning
V-Massage: Accelerate blood circulation, release fatigue, V-face
Product Introduction: Essence, serum, botox introduction by RF,Jet peel and needle-less injector
Warm and Cool Hammer: Pores opening, stimulate products absorption and metabolism. Cool off skin, heat reduction after optical treatment
Water Lock Moisturizing: Deeply moisturizing by steamer, sprayer

Advantages

Multi-functional and economical 8 in 1 facial machine to meet all your needs
Pores cleaning tip is manual control with a small hole, easy to clean and maintain
Particular steamer with deep penetration, double nozzles and adjustable angle to promote pore expansion for better treatment result
Needle-free injector, the best partner for hyaluronic acid and botulinum toxin introduction

Skin Cleaning

Pores, face, back and Chest cleaning

Product Introduction

Essence, serum, botox introduction by RF, Jet peel and needleless injector

Anti-aging

Eye bag, eye circle, wrinkle removal,Face lifting, tightening

V-Massage

Accelerate blood circulation, release fatigue, V-face

Cool & Warm hammer

Pores opening, stimulate products absorption and metabolism.Cool off skin, heat reduction after optical treatment

Water Lock moisturizing

Deeply moisturizing by Steamer, sprayer

Specification

Name	Kissface
Treatment tip number	8 treatment tips
Power	1260W（when water is boiling）
Patter working mode	1 to 8
Patter frequency	1Hz to 10Hz
RF frequency	2Mhz
Cool & warm hammer temperature	- 5 °C to 45°C
Clean brush rotaing speed	200 rpm
Input VAC	AC 220V /50 – 60 Hz(AC 110V optional)

Benefits

Steamer

Since the ionized steam is rich in oxygen ions, the steam increases the temperature of the skin, speeds up the local blood flow, supplies oxygen and moisture to the epidermal cells, and moisturizes the skin. The customer’s skin is oily. When the steam is sprayed on the face, the epidermal cells skin becomes swell, soften and pores expand. At the same time, steam stimulates nerve endings, promotes cell metabolism, and facilitates the removal of excessive sebum.

Advantage

Ion atomization, deep hydration;
A wider range of nebulization and a larger treatment range;
180° rotation of support arm and 360° rotation of treatment tips, more flexible operation;
The outlet temperature is 100℃, the thermal spray temperature is satisfied, and the effect is good.

Pore cleaning

Utilizing the suction of negative pressure to suck away the oil clogged in the pores, it can deeply clean the face, remove mites and oil residues, and make the pores more comfortable.

Advantage

Quartz glass material, more comfortable, no tearing.
User-friendly design, flexible suction control.
Strong cleaning, 6 times better than hand cleaning.

Patter

Easy for operation, no stress to the skin.
Gentle massage,more comfortable and flexible

Advantage

Using the negative pressure suction and release mode, the skin is comfortably cared for rhythmically, no harm to skin horny

Clean Brush

High quality rayon material, durable and suitable for all skin type.
The effect of brush cleaning is more effective than hand cleaning.

Advantage

Equipped with two brush heads, choose brushes with different diameters according to using on different parts of the body;After use, cleaning and disinfection,they can be reused.

Needleless Injector

Non-invasive, safe and painless.
Best partner of Hyaluronic acid, Botox, serum etc. introduction.
The user-friendly design, smart selection for the dose, time and frequency according to different patients. .

Advantage

Safe and non-invasive;
Treatment comfort;
easy to use

Jet Peel Sprayer

More delicate spray, greatly enhance the absorption of product.
Apply to different products

Advantage

Flexible switch control;
The hand-piece is more suitable for the grip of both hands and is convenient for operation;
The spray is finely made, which is better absorbed by the skin;
With high spray force, more product can be injected into the base layer.

Unipolar RF

Safe, comfortable, no tingling.
2Mhz RF with stable energy output.
Combine with your product, achieve double effect.

Advantage

Single-stage radio frequency, temperature stimulation reaches the dermis layer and the thermal effect reaches 55-65℃, the effect is better; Negative clamp design, can be directly clamped to the wrist, easy to operate, stylish appearance; Use any product together to open the skin absorption channel and allow more nutrient solution to be injected into the skin.

Cool & Warm Hammer

Quick switch between two working modes.
Good partner of optical device treatment.
Through the handle, the temperature of -5 to 45 degrees is continuously delivered, which acts on the skin. When the temperature is Lower than the epidermal temperature, it can shrink the pores and lock the nutrients. When the higher temperature is used, it can stimulate the regeneration of collagen in the dermis,achieving firming and anti-aging effect.

Advantage

Stable temperature
The warm and cool switch quickly.

Safety Precautions

First check whether the power switch of the instrument is in the off state (press to the off state), then firmly insert the power cord into the AC socket of the host, and then firmly insert the power plug into the socket;
When using steam spray, please do not suddenly change the angle of the steam head, arm and touch the vicinity of the steam nozzle to avoid the danger of burns;
Do not touch the heating part (kettle);
Do not use tap water as a thermal spray, distilled water or purified water can be used;
The distance between the steam outlet and the customer’s face should be 35~40cm, not too close to avoid scalding;
Except for adding water to the water tank, it is forbidden to open the water filling cover to avoid the danger of scalding;
When the water tank needs to be cleaned after the operation, please clean it more than 60 minutes after using to ensure that the water in the water tank is not hot.

Instrument parts display

Water tank

Add kettle

power cable

Clean handle cable

Massage cleaning cable

Cold hammer

Brush head connection line

Electric ion connection line

Sprayer connection line

Brush head

Import instrument

Spray bottle

Negative pressure cleaning treatment

Massaging

Needle-free water gloss

Instrument installation

Massage cleaning head

First put a section of the hose connected to the treatment head above the hanger, and then insert the connecting tube parallel to the PATTER connection.

Spray bottle

First connect one end of the hose to the spray bottle, place the spray bottle on the hanger, and then insert the connecting tube parallel to the SPARY connection.

Clean the handle

First put a section of the hose connected to the treatment head above the hanger, and then insert the other end of the connecting tube parallel to the KISSING connection.

Cold temperature hammer

First put the cold temperature hammer on the top of the hanger, and then insert the connecting pipe parallel to the COOL&WARM connection.

Cleaning brush

First install the brush head, align the brush head vertically with the handle interface, pull down the silver metal part of the handle interface and insert the brush head onto the hanger, and then insert the connecting pipe parallel to the BRUSH PEELING connection.

RF head

First connect the negative clamp and the lead-in instrument, the white end is connected to the lead-in instrument, the gray end is connected to the negative clip, after the connection is made, put the negative clip and the lead-in instrument on the top of the rack, and then insert the connecting tube parallel to the IONIC connection.

Water tank

First install the water tank of the sprayer, pick up the water tank and connect it to the instrument. Place the water handle on the right side. After alignment, you need to rotate the handle to the middle, then knock down the valves on both sides to lock it, and then open the cover on the water tank. , Use a kettle to add water to more than two-thirds.

Screen introduction

1.Thermal spray time display area.
2.Adjust thermal spray time button.
3.There is no water in the hot spray tank, or the water level is too low, an alarm will be displayed.
4.Thermal spray button, click to start spray.
5.Click to start boiling water.
6.Tap to reduce energy, frequency or suction.
7.Start/pause；
8.Click to increase energy, frequency or suction.
9.Watering can or blackhead treatment head selection button. After clicking, the two icons above the button will light up at the same time. You can choose either watering can or cleaning head to use.
10.Pa Pa Pa massage treatment head selection button, after clicking the button, the icon on the left side lights up (the frequency of negative pressure can be adjusted at this time), click the button again, the icon on the right side lights up (the suction power can be adjusted at this time).
11.RF treatment head selection button.
12.The cleaning brush selection button, click the button on the left side of the icon to light up (the cleaning brush rotates clockwise), click the button again, the right icon to light up (the cleaning brush rotates counterclockwise).
13.The hot and cold hammer selection button, after clicking the button, the icon on the left side lights up (the heating mode is turned on), click the button again, the icon on the right side lights up (the cooling mode is turned on).
14.Needle-free water light adjustment area.

Treatment steps

1. Remove makeup and clean face, take pictures before surgery.
2. Remove the metal jewelry on the surface of the customer's body (watches, necklaces, earrings, rings, etc.).
3. Clean the skin with a brush first.
4. After cleansing the skin, the distance between the steam outlet and the customer’s face should be 35~40cm when using the steam hot spray. At the same time, you can apply blackhead drainage liquid on the nose (10~15 minutes).
5. Remove the blackhead outlet liquid patch, and select the suction treatment head to suck the blackhead while hot spraying.
6. Massage and soothe the skin with a papa treatment head for about 5 minutes.
7. The radio frequency treatment head introduces products to lift and tighten the skin for about 10 minutes.
8. Finally, use a hot and cold hammer to open and shrink pores.
9. Precautions after surgery.

Manipulation

Front breast cleaning (optional)

purpose:

Clean the oil on the front chest and remove excess horny, thereby improving the problem of enlarged pores and acne; and it can promote skin metabolism, keeping the skin healthy and delicate.

Technique:

Starting from the client’s shoulder, make a circle (3~5 circles) according to the rotation direction of the brush; then wash 3~5 times from the shoulder to the neck, then wash from the right chest to the left in a spiral manner, back and forth 3~5 Times; the last same way to operate the left.
(According to customer needs, the entire appeal procedure can be repeated 1~3 times)

Precautions:

1: Choose a large or medium brush head for the brush;
2: Before using the brush, you can apply the facial cleanser to the treatment area in advance and moisten it with water;
3: If the environment is relatively dry, you can add some water in time during the operation.

Facial cleansing

purpose:

Deep cleansing of facial oil, aging keratin and other impurities, to clean facial skin pores, improve large pores; also improve the phenomenon of acne caused by excessive oil.

Technique:

Starting from the center of the eyebrows of the client perpendicular to the hairline, move to the right in a Z-shape to the end of the eyebrows and slide to the chin, from the chin Follow the facial contour line and move to the right to the lower eye corner in a Z-shape (the operation on the right is completed, you can repeat 3~5 times); Then use the same method to operate the left face 3~5 times, and then wash the chin and neck area, also 3~5 times.
(According to customer needs, the entire appeal procedure can be repeated 1~3 times)

Precautions:

1: Choose medium or small brush head for the brush;
2: Before using the brush, you can apply the facial cleanser to the treatment area in advance and moisten it with water;
3: If the environment is relatively dry, you can add some water in time during the operation;
4: Be careful not to touch the eyeballs, mouth and nostrils during operation;
5: According to the customer's skin condition, choose a suitable facial cleanser. If the customer's skin is sensitive, they need to use a mild and non-irritating facial cleanser to prevent customers from being allergic to facial cleanser;

Deep cleansing of skin

purpose:

Deeply cleans pores, blackheads, oils and acne, so that pores are clean and pores become thinner; it can improve the problems of large pores and uneven skin tone.

Technique:

The operator's finger presses the negative pressure hole on the side of the treatment head. At this time, the treatment head will have suction force. Use the sliding technique to slide and absorb the skin in the order of nose, lip, chin, eyebrows, and upper brow bone to clean the pores. When you want to leave the skin, remove your finger from the negative pressure hole and then lift the treatment head.
(According to customer needs, the entire appeal procedure can be repeated 1~3 times)

Precautions:

1: Before treatment, the thermal spray function of the instrument needs to be warmed up in advance;
2:Apply blackhead drainage solution to the treatment area for at least 10 minutes in advance;
3: When applying the blackhead export liquid, you can choose the thermal spray function to use together, and the blackhead will be better softened;
4: During treatment, the thermal spray function needs to be used at the same time, the effect is better;
5: Blazes may appear on the skin, which is normal, and usually disappear on their own within 1 to 3 days;

Soothing skin massage

purpose:

Soothing massage promotes skin metabolism and speeds up blood circulation.

Technique:

The operator presses the negative pressure ports on the sides of the two treatment heads with the fingers of both hands at the same time, and simultaneously increases the hand sliding operation along the facial contour line with the suction and release frequency.
(The whole step is about 5 minutes)

Precautions:

1: Before operation, apply a layer of lubricating product (essential oil or moisturizing product) on the skin surface;
2:It can also be operated with thermal spray without applying the product, using the water vapor attached to the skin surface to slide the thermal spray.;
3: Be careful to avoid the upper eyelid during operation;

Compatible products

1. Thermal spray: only pure water or distilled water can be used.
2. Washing brush: facial cleanser.
3. Negative pressure cleaning head: blackhead outlet liquid.
4. Radio frequency head: Import function: hyaluronic acid, vitamin C, vitamin E, tranexamic acid, arbutin, tranexamic acid and other nutritional products; if it is to enhance function: radio frequency cream, gel, essential oil, etc.; accelerate skin metabolism function: radio frequency Creams, gels, essential oils, etc.
5.Needle-free water: hyaluronic acid, vitamin C, vitamin E, tranexamic acid, arbutin, tranexamic acid and other nutritional products.
6. Watering can: purified water, normal saline, growth factor, vitamin C nutrient solution and other products.
7. Pata massage head: none.

Treatment Effects